Home.Guides.About RV8R.Resource.Information.Contacts.
 The source of the Resources
For all things Rover V8, the TVR Griffith and Chimaera and TVR T-Cars
Technical specifications of the Tuscan, Tuscan 2 and Sagaris

Engine
Displacement: 3,996 cc
Hand-built proprietary six-cylinder inline aluminium alloy engine with four valves per cylinder and dry sump lubrication
Double overhead camshafts with direct cams actuating valves via finger followers
Forged aluminium pistons and forged steel con rods
Individual port throttles on tuned inlet tracts with multipoint fuel injection
Fully mapped ignition and injection system with adaptive Lambda control
Double close-coupled three-way catalytic converters
Maximum power at 7,200 rpm (extimated)
Tuscan    Tuscan S    Sagaris
365 bhp   380 bhp     380 bhp
Maximum torque at 5,000-5,500 rpm (estimated)
Tuscan    Tuscan S    Sagaris
290 lbft   320 lbft     320 obft

Performance
Maximum speed (estimated)
Tuscan        Tuscan S        Sagaris
160+ mph   160+ mph      160+ mph
0 to 60 (estimated)
Tuscan     Tuscan S    Sagaris
4.2 secs   3.7 secs     3.7 secs
0 to 100 (estimated)
Tuscan     Tuscan S   Sagaris
9.0 secs   8.1 secs    8.1 secs

Driveline
Front-mid engine, rear wheel drive
Clutch: twin plate organic 215 mm AP racing clutch
Transmission: five speed manual and limited slip differential
Steering: electro-hydraulic power-assisted rack and pinion, two turns lock to lock

Brakes, wheel and tyres
Front brakes
Power assisted ventilated disc brakes with four piston alloy callipers
Tuscan    Tuscan S   Sagaris
304 mm   322 mm   322 mm
Rear brakes
Power assisted ventilated disc brakes with single piston sliding callipers
Tuscan    Tuscan S   Sagaris
282 mm   298 mm    298 mm
Wheels: seven spoke aluminium alloy wheels
Tuscan    Tuscan S   Sagaris
16 inch   18 inch      18 inch
Front tyres
Tuscan           Tuscan S          Sagaris
225/50 ZR16   255/35 ZR18    255/35 ZR18
Rear tyres
Tuscan           Tuscan S          Sagaris
225/55 ZR16   255/35 ZR18    255/35 ZR18

Chassis
Powder coated tubular EN36 steel backbone chassis with integral roll cage or roll-over hoops
Suspension
All round independent double wishbones with coils over gas hydraulic dampers assisted by anti-roll bars
Body
Hand laid composite GRP with integrated steel side impact protection bars

Weights, dimensions and capacities
Kerb weight
Tuscan     Tuscan S    Sagaris
1,167 kg   1,170 kg    1,115 kg
Length
Tuscan       Tuscan S      Sagaris
4,235 mm   4,235 mm    4,057 mm
Width including mirrors
Tuscan       Tuscan S       Sagaris
1,810 mm   1,810 mm     1,850 mm
Height
Tuscan       Tuscan S       Sagaris
1,200 mm   1,200 mm     1,175 mm
Ground clearance
Tuscan      Tuscan S     Sagaris
102 mm    102 mm      85 mm
Front track
Tuscan       Tuscan S      Sagaris
1,470 mm   1,460mm     1,510 mm
Rear track
Tuscan       Tuscan S      Sagaris
1,470 mm   1,470 mm    1,520mm
Wheelbase
All vehicles 2,361 mm
Fuel capacity
All vehicles approx. 57 litres. 95/98 octane unleaded.
T-cars Tech spec
Below is the technical specification of all three cars then in production according to the press pack distributed at the London Motor Show in 2005. These are TVR figures. You will note that the front track of the Tuscan S is given as 10 mm narrower than the Tuscan. Whether this is correct or not . . . Well, I don’t know.